V1411 - Mini Heavy Duty 30"H x 16"W x 42"L
600x300 polyester with PVC rubber backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
NOTE: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced. Damage to your cover following misuse is not covered under any warranty. See our Policies page for more info.
The cover will provide protection for your vehicle (scooter/ wheelchair) from the weather and dust. Yet, it is lightweight and easy to get on and off!
Slip the cover over your vehicle and pull the elastic down under your chassis. Pull the chord lock so that it is tight around the bottom. For extra security, when transporting your vehicle on the back of your car or van, tie down the bottom by hooking bungee cords (not included) through the bottom belt loops.
Note 1: This is a Heavy Duty cover, you will have a 1" webbing belt through belt loops to tighten.
Note 2: Depending on your vehicle, cover may not fit over wheels.
Note 3: *These statements are intended to be used as a guide line when deciding which cover would work best for you. Some Scooter/ Power chair models may very.
Types of scooters this cover will fit*:
Not a 100% complete list, your scooter may not be on this list yet.
Gogo ES 2
Gogo Elite Traveler 3W
Gogo Ultra X 3W