Folding Manual Wheelchair Cover


  • Our Manual Wheelchair Covers are made with our standard material of water-resistant nylon with a urethane backing and outer DWR coating. We use the best technique for seam protection for the greatest weather protection.
  • The cover has a full back slit which allows the cover to be placed on once the wheelchair is in the hanging arm of the carrier and then to cover the wheelchair.
  • Pull cord with cord lock and grommets are included along the bottom for additional securing.
  • Always secure your cover with bungee cord(s) or other methods when transporting on the roadways. The cover is not intended for highway use without the use of a securing device such as rope or bungee cords (not included) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced. Damage to your cover following misuse is not covered under any warranty. See our Policies page for more info.


Dimensions: 38”H x 7”W x 44”L